| Part
Number |
Description |
 |
Price |
 |
|
|
|
|
| A-8050 A |
1928-29 Black plastic radiator fan shroud, used originally in
1928. Increases radiator efficiency |
 |
$69.95 |
| A-8050 B |
1930-31 Black plastic radiator fan shroud, used in 1930-31 |
|
$69.95 |
| A-8100
A
| 1928-29
Radiator cap
|
|
$15.95
|
| A-8100
B
| 1930-31
Radiator cap
|
|
$19.95
|
| A-8110
AR
| 1928-29
Original style radiator cap gasket
|
|
$0.80
|
| A-8110
B
| 1930-31
Original style radiator cap gasket
|
|
$0.80
|
| A-8115
RE
| 1928-31
Petcock, replacement type
|
|
$6.95 |
| A-8115
OR
| 1928-31
USA original style brass petcock
|
|
$8.95 |
| A-8125
| 1928-31
Radiator mtg. pads, pair
|
|
$0.75
|
| A-8130
| 1928-42
Radiator mounting kit
|
|
$4.30 |
| A-8130
SS
| 1928-31
Radiator mounting kit, stainless steel
|
|
$9.25
|
| A-8133
| 1930-31
Solid radiator brace rods. Will also fit 1928-29
|
|
$9.50
|
| A-8133
AR
| 1928-29
Tubular Radiator brace rods
|
|
$27.95
|
| A-8133
SS
| Same
as above in stainless steel
|
|
$21.95 |
| A-8140/41
| 1928-31
Radiator brace rod dash bracket
|
|
$3.95
|
| A-8140/41
SS
| Same
as above in stainless steel
|
|
$9.95
|
| A-8200
DSS
| 1930
S/S Radiator shell, reproduction
|
|
$525.00
|
| A-8200
BS
| 1928-31
Radiator shell mounting bolt set
|
|
$1.25
|
| A-8200
C
| 1928-29
Chrome reproduction radiator shell
|
|
$140.00
|
| A-8200
N
| 1928-29
Nickel reproduction radiator shell (DISCONTINUED)
|
|
|
| A-8200
S
| 1928-29
"Smoothie" plain steel radiator shell, no holes, ready to paint
|
|
$98.00
|
| A-8200
SS
| 1931
S/S Radiator shell, reproduction
|
|
$525.00
|
| A-8210
AS
| 1928-29
Radiator grommet sets
|
|
$2.25 |
| A-8210
BS
| 1930-31
Radiator grommet set
|
|
$2.25 |
| A-8212
A
| 1928-30
Radiator emblem
|
|
$27.50 |
| A-8212
B
| 1931
radiator emblem
|
|
$18.75
|
| A-8216
A
| 1928-29
Crank hole cover
|
|
$2.40
|
| A-8216
B
| 1930-31
Crank hole cover
|
|
$2.40
|
| A-8220
C
| 1928-31
Front hood retainer clip, mounts on shell
|
|
$2.95
|
| A-8250
A
| 1928-29
water outlet
|
|
$18.95
|
| A-8250
B
| 1930-31
water outlet
|
|
$18.95
|
| A-8251 AX |
1928-29 Waterneck outlet (for use with temperature gauge
probe) |
|
$43.00 |
| A/8251 BX |
1930-31 Watermeck outlet (for use with temperature gauge
probe) |
|
$43.00 |
| A-8255
| 1928-31
water outlet gasket
|
|
$0.50
|
| A-8255
C
| 1928-31
water outlet gasket copper
|
|
$4.00
|
| A-82556 P |
Temperature gauge probe pipe, mounts in upper radiator hose
to accept temperature probe |
|
$12.95 |
| A-8260/82
S
| Radiator
hose kit. Black hose w/red stripe and clamps, set
|
|
$16.95
|
| A-8260/86
| 1928-29
Red radiator hose set
|
|
$13.75
|
| A-8260/86
B
| 1930-31
Red radiator hose set
|
|
$15.75
|
| A-8260/86
R
| 1928-31
Black radiator hose set |
|
|
| A-8261-87
| 1928-34
Authentic type hose clamp set. 6 pc. set
|
|
$5.75
|
| A-8270
| Model A
thermostat with 1 inch welded pipe |
|
$10.95
|
| B-8280
| 1928-34
water intlet gasket
|
|
$0.40
|
| B-8280
C
| Copper
water inlet gasket, like original
|
|
$3.35
|
| A-8291
A
| 1928
Water outlet pipe w/powerhouse generator,
Powder Coated |
|
$11.95 |
| A-8291
B
| 1930-31
Water outlet pipe, Powder Coated |
|
$11.95 |
| A-8291
BSS | 1930-31
Stainless steel water outlet pipe |
|
$17.95 |
| X-8500
| Water
Water pump wrench
|
|
$1.50
|
| A-8006
A
| 1928-29
Radiator - 3 tube heavy duty complete (5 fins per inch)
|
|
$530.00
|
| A-8006
B
| 1930-31
Radiator - 3 tube heavy duty complete (5 fins per inch)
|
|
$530.00
|
| A-8006-AHD
| 1928-29
Super heavy duty radiator. Has more fins than A-8006 A and greater cooling
capacity. 10 fins per inch
|
|
$595.00
|
| A-8006-BHD
| 1930-31
Super heavy duty radiator. Has more fins than A-8006 B and greater cooling
capacity. 10 fins per inch
|
|
$595.00
|
| A-8006
AE
| 1928-29
3 tube extra heavy duty radiator (8 fins per inch)
|
|
$585.00
|
| A-8006
BE
| 1930-31
3 tube extra heavy duty radiator (8 fins per inch)
|
|
$585.00 |
| A-8501
| 1928-31
Water pump, new original style
|
|
$80.95 |
| A-8501 AN |
Filler Neck, 1928-29 radiator |
|
$25.95 |
| A-8501 BN |
Filler Neck, 1930-31 radiator |
|
$25.95 |
| A-8501
GF
| 1928-31
Water pump grease fitting
|
|
$2.35
|
| A-8501
I
| 1928-31
Water pump impeller
|
|
$5.75
|
| A-8501
LC
| 1928-31
Water pump leather cover (Discontinued) |
|
$6.25
|
| A-8501
LCG
| Water
pump green leather cover
|
|
$6.25
|
| A-8501
LKB
| 1928-29
Leakless water pump, sealed front bearing, double lip seal at rear of bronze
bushing, stainless shaft, no end play, must have your rebuildable pump before
shipping, two year warranty.. ( with brass nut)
(DISCONTINUED) |
|
$120.00
|
| A-8501
LKZ
| 1930-31
Leakless Water Pump, same as above, except with Zink nut (DISCONTINUED) |
|
$120.00
|
| A-8501
MB
| 1928-31
Water pump mounting studs
|
|
$2.55
|
| A-8501
MBM | 1928-31
Water pump bolts. Looks like studs. Makes pump installation easier |
|
$5.95 |
| A-8501
SPG
| STA-PUT
best water pump grease available withstands hi-temperature, extreme pressure
and is waterproof, 14 oz. tube
|
|
$3.75
|
| A-8506
MB
| 1928-31
W/P Shaft castille nut woodruff key and cotter pin
|
|
$1.50
|
| A-8501
Y2KB
| 1928-30
leak proof water pump with stainless steel shaft, modern bearing and brass
A-8523 Y2KZ installed, needs no grease
|
|
$140.00
|
| A-8501
Y2KZ
| 1930-31
Same as A-8501 Y2KB with zinc A 8523 Y2KZ installed, needs no grease
|
|
$140.00
|
| A-8507
| 1928-31
Water pump gasket
|
|
$0.50
|
| B-8507
| 1932
Water pump mounting gasket
|
|
$0.80
|
| A-8510
ISS
| Stainless
steel shaft with impeller mounted
|
|
$23.50 |
| A-8510
SS
| Stainless
steel water pump shaft
|
|
$12.95
|
| A-8510
TW
| Teflon
washer for pump shaft 1/16" thick
|
|
$1.75
|
| A-8510
TWC
| Collar
with wear resistant washer, Put in front of pack nut to stop shaft end play
|
|
$3.50
|
| A-8510/30M
| 1928-31
Front modern day water pump cartridge pressed on stainless steel shaft.
Requires arbor press fit
|
|
$30.95 |
| A-8511
C
| Water
pump collar 5/8"
|
|
$1.75
|
| A-8513
A
| Water
pump impeller thrust washer. Fits inside pump, steel
|
|
$0.70
|
| A-8513
B
| Water
pump thrust washer. Same as A-8513A but made of brass
|
|
$1.30
|
| A-8520
| Water
pump bushing, stock
|
|
$8.40 |
| A-8520
B
| 1928-31
All brass as original rear bushing
|
|
$7.50 |
|
A-8520 S |
Leakless lower bushing. Rear of bushing recessed
for neopreme seal |
|
$12.50 |
| A-8523
A
| 1928-29
Brass Water pump pack nut
|
|
$9.75 |
| A-8523
LK
| 1928-31
leak less water pump brass pack nut, Tested and proven with modern day
seals instead of packing
|
|
$17.95
|
| A-8523
Y2KB
| Original
looking brass pack nut w/needle bearing and modern seal
|
|
$30.95
|
| A-8523
Y2KZ
| Original
looking zinc pack nut w/needle bearing and modern seal
|
|
$30.95
|
| A-8523
LKZ
| Same
as above zinc nut
|
|
$17.95
|
| A-8523
Z
| 1930-31
Zinc water pump pack nut
|
|
$7.95 |
| A-8524
| 1928-31
Water pump packing solid lead graphite
type, split ring (3/16) |
|
$3.50
|
|
A-8524 R |
Water Pump Packing (Graphite Rope type) |
|
$1.50 |
|
A-8524 S |
Water Pump Packing solid lead graphite type,
split ring (5/16) |
|
$3.20 |
| A-8524
T
| Teflon
water pump packing
|
|
$2.25
|
| B-8530
| 1928-31
Water pump bearing and sleeve
|
|
$3.95
|
| A-8530
M
| 1928-31
Modern day pump bearing and sleeve has a hardened sleeve. Requires pressing
on
|
|
$16.50 |
| A-8540
A
| Water
pump front bearing cup washer
|
|
$0.60 |
| A-8542
| 1928-31
Water pump bearing felt
|
|
$0.35
|
| A-8542
S
| Water
pump seal kit, 6 pc.
|
|
$1.95
|
| A-8554
| Water
pump bearing flat washer
|
|
$0.50
|
| A-8591
| 1928-31
Water pump rebuild kit
|
|
$42.95
|
| A-8591
SS
| 1928-31
Water pump rebuild kit with stainless steel shaft
|
|
$44.95
|
| BB-8600
| 1928-31
4- Blade fan (steel) DISCONTINUED |
|
|
| A-8600
| Fan blade
assembly, one piece cast aluminum
|
|
$47.95
|
| A-8600 KO |
1928-31 Model A Fan blade knock off tool. Makes fan blade
removal easy. |
|
$2.40 |
| A-8600
P
| 1928-31
Modern plastic fan with machined steel hub. 6 blade for extra cooling
|
|
$66.95 |
| B-8620
| 1928-31
fan belt (DISCONTINUED) |
|
$8.95
|
| B-8620
R
| 1928-31
Black belt original wrapper style 43"
|
|
$10.95 |
