| Part Number |
Description |
 |
Price |
|
 |
|
|
|
| T-4131 |
1926-27 Choke Rod Sleeve U-Joint and Spider |
|
$22.95 |
| T-4132 |
1926-27 U-Joint spider |
|
$1.95 |
| T-4134 |
1909-27 Carb to manifold gasket |
|
$0.35 |
| T-4452 |
1914-21 Ford G carburetor spray needle assy. |
|
$7.95 |
| T-4471 |
1912-19 Holley Brass Clamp Adjusting Nut |
|
$4.25 |
| T-4472 |
Model G Holley Bowl Nut (1-1/4 Hex) |
|
$4.95 |
| T-4582 |
1912-27 Steel pipe that runs from manifold to carburetor to
preheat air |
|
$12.95 |
| T-4591 |
1926-27 Choke rod sleeve |
|
$2.75 |
| T-6111 |
1913-20 Kingston L-2 Bowl Nut (7/8 Hex) |
|
$6.75 |
| T-6150 |
1917-20 Kingston L-2 Drain Body |
|
$6.95 |
| T-6151 |
1920-26 Kingston L-4 Drain Body |
|
$6.95 |
| T-6151 B |
1923-27 Holley NH Drain Body (Thread) |
|
$6.95 |
| T-6151 NH |
1920-21 Holley NH Drain Body (Solder) |
|
$9.50 |
| T-6152/72 |
Kingston float valve and seat, model L-4 |
|
$9.45
|
| T-6161 |
1910-25 Kingston L, L-2, L-4 carburetor spray needle
assy. |
|
$7.95 |
| T-6163 |
1921-25 Kingston L-4 Bowl Nut (3.4 Hex) |
|
$7.50 |
| T-6163 B |
1921-25 Kingston L-4 Bowl Nut (15/16 Hex) |
|
$6.50 |
| T-6164 |
1909-27 Kingston Carburetor Choke Spring |
|
$1.25 |
| T-6165 |
1915-26 Kingston L-4 Spray Needle Nut |
|
$7.95 |
| T-6169 |
1915-19 Kingston L-4 Drain Needle |
|
$7.00 |
| T-6169 B |
1914-27 Holley G, NH, Vap. Drain Needle. |
|
$8.50 |
| T-6200 C |
1920-25 Carburetor, absolutely authentic for 1923-25 cars but
may be used on earlier cars as well. Equipped with long choke and
throttle levers and flat spray needle yoke. (DISCONTINUED) |
|
$210.00 |
| T-6200 C REB |
1920-25 Rebuilt NH carburator, core required |
|
$120.00 |
| T-6200 D |
1926-27 Carburetor, equipped with short yoke and throttle
levers and swivel spray needle yoke.(DISCONTINUED) |
|
$215.00 |
|
T-6200 D REB
|
1926-27 Rebuilt carburetor with swivel top. Core
required |
|
$125.00 |
| T-6200 DATA |
NH carburetor, data plate |
|
$1.50 |
| T-6200 NH |
1920-26 Ford NH carburetor gasket set |
|
$1.75 |
| T-6200 NHR |
NH carburetor data plate rivets (price per pr.) |
|
$0.40 |
| T-6200 G |
1913-21 8 pc. gasket set for Model G carburetor |
|
$1.95 |
| T-6200 L-4 |
1921-26 Kingston L-4 gasket set |
|
$2.00 |
| T-6200L |
1912-21 Kingston model L gasket set |
|
$1.95 |
| T-6200 VAP |
Vaporizer gasket set |
|
$1.75 |
| T-6200 RE |
Model T replacement carburetor. Hooks up to throttle linkage and choke. Adjustment under hood. Complete with air filter.
Increase power and gas mileage. |
|
$205.00 |
| T-6201 |
1916-27 Carburetor float, small bowl. |
|
$15.95 |
| T-6201 G |
Holley 'G" cork float |
|
$15.00 |
| T-6201 L |
Kingston L-2 cork float |
|
$13.95 |
| T-6202 C |
NH Carburetor bowl |
|
$8.35 |
| T-6205 |
1919-27 Small bowl carburetor air filter. Machined aluminum
throat with foam filter and spring which holds the unit on by
putting pressure on the transmission cover and carburetor.
Complete and ready to install, oil included. |
|
$34.00 |
| T-6205 F |
Foam filter replacement element for T-6205 |
|
$10.95 |
| T-6205 O |
Foam filter oil for T-6205, aerosol |
|
$7.50 |
| T-6206 A |
1914-23 NH Throttle Shaft Lever |
|
$12.50 |
| T-6206 B |
1914-23 NH Choke lever shaft and spring |
|
$11.95 |
| T-6206 C |
1923-26 NH Throttle Shaft Lever |
|
$11.95 |
| T-6206 D |
1923-26 NH Choke lever shaft and spring |
|
$11.95 |
| T-6208 |
Carb, Adj. Clamp Nut, 1920-25 NH |
|
$4.25 |
| T-6208 B |
Adjusting needle, clamping nut used only on 1926-27 NH
carburetor |
|
$3.95 |
| T-6209 |
1920-26 Carburetor throttle and choke plate, Ford NH
(ea.) |
|
$2.20 |
| T-6210 |
1920-26 Float lever pin, Ford, NH
(ea.) |
|
$0.60 |
| T-6210/12 GJ |
Float valve and seat. Modern design with two ball seat for NH
holly carburetor. |
|
$18.95 |
| T-6210/12 |
Original design float valve for NH Holly (DISCONTINUED) |
|
|
| T-6210/12 GL |
Grose jet for Kingston L |
 |
$21.95 |
| T-6210/12 GL4 |
Grose jet for Kingston L-4 |
|
$14.50 |
| T-6210/12 G |
Grose jet for Holley G |
 |
$20.00 |
| T-6210/12 GV |
Grose jet
Vaporizer |
|
$18.95
|
| T-6212 S |
1920-26 Ford NH viton seat |
|
$12..50 |
| T-6213 |
1920-25 Spray needle |
|
$9.50 |
|
T-6213 B |
1925-27
Spray needle used with choke rod sleeve and spider |
 |
$12.95 |
| T-6214 B |
1920-26 Spray nozzle |
|
$6.50 |
| T-6216/21 |
1920-26 Model NH drain valve and plug set |
|
$9.95 |
| T-6216/91 |
Vaporizer drain valve assy. |
|
$12.95 |
| T-6216 |
1916-26 NH Carburetor drain valve plug |
|
$5.60 |
| T-6217 |
1911-26 Carburetor throttle lever stop screw, Ford NH
(ea) |
|
$0.75 |
| T-6218 |
1926-27 Choke retum spring for the Holley NH
carburetor |
|
$1.30 |
| T-6223 AS |
1926-27 Holley Carburetor repair kit |
|
|
| T-6223 BS |
1921-26 Kingston Carburetor repair kit |
|
|
| T-6224 |
1920-27 Carburetor throttle and choke plate clip, Ford NH,
Kingston L-4, Vaporizer (ea.) |
|
$0.75 |
| T-6256 |
1926-27 Vaporizer choke lever assembly |
|
$14.95 |
| T-6257 |
1926-27 Vaporizer choke plate |
|
$1.95 |
| T-6259 |
1926-27 Vaporizer throttle lever and rod assembly |
|
$10.50 |
| T-6260 |
1926-27 Vaporizer Throttle plate |
|
$2.50 |
| T-6263 S |
1926-27 Vaporizer air shaft assembly and screw
set. |
|
$5.80 |
| T-6269 |
Vaporizer outlet tube, brass w/flange |
|
$3.35 |
| T-6271 |
Vaporizer outlet tube nut |
|
$3.95 |
| T-6273 |
1926-27 Vaporizer plate |
|
$2.50 |
| T-6276 |
Vaporizer air tube |
|
$4.75 |
| T-6277 |
Vaporizer heating support |
|
$2.25 |
| T-6278 |
1926-27 Vaporizer adjusting needle nut |
|
$3.95 |
| T-6279 |
1926-27 Vaporizer adjusting needle assembly |
|
$11.95 |
| T-6283 |
1926-27 Vaporizer Adjusting needle seat |
|
$6.95 |
|
T-6295 OR |
1909-27
Original carburetor inlet elbow |
 |
$3.95 |
|
T-6295 RE |
Replacement
carburetor inlet elbow with compression fitting |
 |
$2.40 |
| T-6299 |
1926-27 Vaporizer Control Rod |
|
$7.95 |